Product Features
Recirculating cooling system designed for use with water cooled tig, mig, plasma arc cutting and plasma arc welding guns and torches; additional applications include resistance welding, induction heating and water cooled fixtures such as edm's and small verti-shield dams; the connection block 5/8-18 left hand thread matches the standard connector nut of water hoses used with domestic water cooled guns and torches; the unique "on-demand" system only pumps coolant when it is needed when first used with a water valve or solenoid in the system
Product Technical Spec.
General Description:
115 volt; 60 hertz; single phase; current draw at input 1.4 amps; rated current draw 2.0 amps; operating pressure 60 psi; shutdown pressure 75-80 psi; no delay after flow is stopped; flow range 0.1 to 1.0 gal/min; operating flow mig with magnum 15 foot gun, .55-.60 gal/min; operating flow tig with magnum 12.5 foot torch .55-60 gal/min; open flow 0.8 to 1.0 gal/min; reservoir size approximately 2.0 gallon; recommended coolant indoors-100de-mineralized, deionized, distilled or tap water; recommended coolant outdoors-50water and 50 3.247478e-306thylene glycol mixture, automotive anitfreeze mixture or any alcohol mixture; shipping weight 30 lbs.; reservoir weight full 43 lbs.; length 9.0 in.; width 9.0 in.; height 26.5 in. At top face; height 28.75 in. At top handle
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Materials
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
Packaging & Shipping
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
Freight Classification
NMFC
UFC
LTL
LCL
WCC
TCC
SHC
ACC
Dept. of the Air Force 
Dept. of the Navy