A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6645-00-758-4567
NSN 5920-01-265-0820
NSN 5985-01-224-5667
NSN 5996-01-215-1988
NSN 5930-01-591-7886
NSN 6220-00-907-7572
NSN 7035-00-392-5417
NSN 5835-01-303-6563
NSN 5935-01-423-0622
NSN 6105-01-099-2837
NSN 5915-01-324-7603
NSN 5910-01-377-3402