No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5998-01-396-8941
NSN 6645-01-177-6021
NSN 5990-01-426-7350
NSN 5999-01-254-3884
NSN 5985-00-936-3823
NSN 5905-01-384-3716
NSN 5998-01-411-6175
NSN 5855-01-445-7980
NSN 5925-01-262-6152
NSN 5855-01-343-7943
NSN 6650-00-960-5040
NSN 6130-01-147-5594