No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6320-00-149-7570
NSN 5950-01-634-0677
NSN 6645-01-304-4308
NSN 6220-01-094-5551
NSN 6610-01-328-1116
NSN 6685-00-797-7543
NSN 5950-01-390-8709
NSN 5975-00-758-2109
NSN 5895-01-119-9900
NSN 6150-00-781-7471
NSN 4140-00-122-6422
NSN 5999-01-234-4528