Two holes, 0.126 in. Min diameter to 0.129 in. Max dia, one on each side in the center along the width
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5895-00-009-1113
NSN 5950-01-297-3079
NSN 5895-01-389-9954
NSN 5990-01-138-8981
NSN 4140-00-758-7686
NSN 5895-01-359-2574
NSN 5965-00-332-8698
NSN 5920-01-512-0713
NSN 5855-00-316-5050
NSN 5990-01-253-5672
NSN 5990-00-277-3763
NSN 6650-00-113-4102