Two holes, 0.126 in. Min diameter to 0.129 in. Max dia, one on each side in the center along the width
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 6220-01-462-0236
NSN 5945-01-074-2662
NSN 6150-00-177-7031
NSN 5975-00-763-5437
NSN 5910-01-571-8500
NSN 5905-00-893-9598
NSN 5998-01-113-7120
NSN 6685-00-272-2267
NSN 6150-01-036-8060
NSN 4140-01-091-5592
NSN 6320-01-422-1212
NSN 6130-00-392-5811