Requested name-tension bolts
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Classification: Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)
NSN 6145-01-386-7073
NSN 6145-01-303-1000
NSN 5990-01-462-1617
NSN 5960-01-512-0233
NSN 5835-01-432-1277
NSN 5930-01-199-5618
NSN 6610-01-301-3513
NSN 6685-00-892-5669
NSN 5996-01-030-1387
NSN 5990-00-552-0731
NSN 5965-01-291-0384
NSN 5915-00-099-0347