Type 1, size b, service pressure c, with the following modifications: a. Tare weight (inclusive of valve and cylinder but without valve protection) will be 20.0 lbs. B.Service pressure 300 psig vs. 260 psi (table iv of federal spec. A-a-59666) c.Height shall be 20.00 +/- 0.5 inches to base of cylinder valve. D.Volume of 538 c.I. (in3) . E.Water capacity of 19.4 . 3.Cylinder valve shall comply with federal specification a-a-59860, cid pin aa59860-049. Nsn 8120-01-204-0182 applies (ceodeux inc. Type 9225, rotarex inc. P/n f21200005 or equal). Valve shall include: a.Safety pressure relief device set to relieve at 450 psig. B.Dip tube connecting the liquid valve to the cylinder bottom. Dip tube length is 17.00 inches, inclusive of 45 degree slant. 4.Cylinder cap shall comply with mil-c-17376/1-2 (3 1/2-uns-1) .
Empty cylinder only.
NSN 4140-00-167-4712
NSN 5990-01-463-2279
NSN 5920-00-276-8657
NSN 6135-01-642-6830
NSN 5895-01-122-0606
NSN 5950-00-397-9869
NSN 6145-01-278-0593
NSN 6645-00-371-1861
NSN 6685-00-342-9408
NSN 6610-00-678-5752
NSN 5930-01-542-6662
NSN 5999-01-644-7657