Multimodefiberoptic/thin coax 10mb media converter designed to join legacy thinnet segments to a fiber-optic link, perhaps remotely or attaching newly installed fiber optic backbone, st connectors on the fiber side and a bnc connector on the thin coax side which accepts any standard "t" connector to join segments; output minus 12.5 v to min 16.0 dbm into 62.5u core cable; link 1.0mhz crystal controlled; input sensitivity minus 12.0 to min 30.0 dbm average; 100ma typicalfiber side: bnc side output dc current level txo typical 41- 45 max ma; squelch threshol (t+ to txo) -225 typical -300 max mv; startup delay (tx+ to txo) typical 1 bits; propagation delay (tx+ to txo) typical 25 50max ns; fiber link, transmit, receiver, collision, jabber: utp receiver, jabber, transmit, collision; meets both 10 base-fl and foirl specs; typically used with 62.5um multimode fiber will also work with 100 and 50 um;
A receiver used for reception of light signals transmitted through an optical conductor. It converts the input to an electronic output signal. Excludes devices that would receive light signals thru a media other than fiber optic conductor such as receiver, infrared.
Classification: Optical devices, appliances and instruments, nesoi
NSN 5895-01-384-1756
NSN 5855-01-085-5354
NSN 7035-01-393-6015
NSN 5920-01-281-5101
NSN 5975-01-595-0682
NSN 5835-00-830-6416
NSN 6645-00-022-8691
NSN 5895-00-891-4498
NSN 5998-01-056-3081
NSN 5920-01-440-9346
NSN 5999-01-256-7333
NSN 5985-01-566-5521