No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6610-00-023-0076
NSN 5975-00-133-8696
NSN 6240-00-079-1759
NSN 5855-00-014-5008
NSN 5998-01-208-9063
NSN 5960-00-764-7164
NSN 5990-00-840-6571
NSN 6220-01-107-2613
NSN 2925-01-194-9737
NSN 6610-00-244-6741
NSN 5925-00-275-7599
NSN 5835-00-770-2843