First end chamfered 5/8 in. By 30 deg; second end counterbored to 1.250 in. Id by 22.000 in. Dp
No other part numbers with same form, fit, and function found.
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5835-00-825-2512
NSN 5925-00-494-4685
NSN 6150-00-216-6542
NSN 5935-00-269-5516
NSN 5975-00-410-4225
NSN 5910-00-234-4353
NSN 6145-01-428-9932
NSN 6150-01-541-7530
NSN 6130-01-400-6123
NSN 5999-01-578-7597
NSN 6610-01-295-6327
NSN 5990-00-004-4158