First end chamfered 5/8 in. By 30 deg; second end counterbored to 1.250 in. Id by 22.000 in. Dp
No other part numbers with same form, fit, and function found.
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 6685-00-708-0128
NSN 5998-00-988-5298
NSN 5935-00-248-5919
NSN 5920-01-296-5461
NSN 6110-01-042-9141
NSN 6685-00-337-5529
NSN 6610-01-376-9199
NSN 5935-01-352-8537
NSN 5965-00-194-7213
NSN 6150-01-457-1037
NSN 5915-00-126-5062
NSN 5960-00-828-2158