Adhisive on one side, and is used in lamination process
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 6220-01-378-7467
NSN 5985-01-285-4719
NSN 6145-01-152-2417
NSN 5950-01-271-4200
NSN 6610-00-242-3160
NSN 5915-01-629-6878
NSN 5950-01-092-1505
NSN 5960-00-197-6282
NSN 5975-00-776-4604
NSN 5925-01-254-2578
NSN 6620-00-730-8699
NSN 5855-00-494-9581