A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5855-00-494-9581
NSN 5985-01-445-9465
NSN 5935-01-495-3391
NSN 5910-01-239-7889
NSN 5905-01-066-1853
NSN 5855-01-027-1571
NSN 6620-01-364-7461
NSN 6320-01-215-1133
NSN 5985-01-560-2295
NSN 6685-00-484-2167
NSN 6130-01-557-8041
NSN 6135-01-511-1975