Spacer, bracket
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5910-00-826-9192
NSN 5999-00-509-5840
NSN 5930-00-278-7731
NSN 6645-00-256-4072
NSN 5975-01-424-4639
NSN 5950-00-448-7419
NSN 6150-01-367-2400
NSN 5990-00-087-6177
NSN 7035-01-193-2667
NSN 5965-00-404-6809
NSN 6105-01-079-3059
NSN 5999-01-119-2983