No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 6110-01-415-6545
NSN 5935-00-266-8506
NSN 5935-01-304-0541
NSN 5895-00-027-3444
NSN 5960-01-226-7297
NSN 4140-01-013-6807
NSN 2925-00-540-9918
NSN 6220-01-388-2269
NSN 6685-00-735-9111
NSN 5935-00-916-3860
NSN 4140-01-553-8769
NSN 4140-01-421-4045