No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5945-00-995-9564
NSN 6110-00-854-2249
NSN 6145-01-116-8137
NSN 5965-00-416-6618
NSN 5985-01-337-6475
NSN 5915-01-036-1336
NSN 5935-00-008-0736
NSN 6610-00-070-1842
NSN 6105-00-265-7545
NSN 7035-01-153-1767
NSN 5996-01-391-8050
NSN 6320-01-481-7322