One mounting hole on one hinge leaf 9/16 in. Dia, located in center 2 in. From end of hinge, 1 in. From side of hinge, two mounting holes on other leaf 7/16 in. Dia, located 2 in. From center to center, 1 in. In from edge of hinge and 3/4 in. From end of hinge
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
NSN 5905-00-188-9029
NSN 6650-01-495-3744
NSN 6130-01-394-4986
NSN 6620-00-466-1997
NSN 5930-00-078-4930
NSN 6610-01-263-2409
NSN 5930-01-144-0872
NSN 5990-01-331-9438
NSN 6620-01-288-4922
NSN 5999-01-634-0576
NSN 5965-00-341-9312
NSN 5895-01-010-4164