A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6220-00-114-4953
NSN 5930-01-344-0519
NSN 5835-01-487-3042
NSN 5985-01-526-8135
NSN 5945-01-265-8589
NSN 6320-01-098-2503
NSN 5925-01-109-8935
NSN 2925-01-459-8093
NSN 5960-01-395-9834
NSN 5920-01-309-9216
NSN 6105-01-018-0667
NSN 5895-00-035-8813