A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6610-01-301-3513
NSN 5855-00-688-9954
NSN 5985-01-375-0381
NSN 6650-00-684-3060
NSN 5925-01-049-5694
NSN 5935-00-155-4662
NSN 5945-00-780-6459
NSN 6650-00-139-5462
NSN 5999-01-273-7927
NSN 5975-01-112-3526
NSN 6130-01-143-2271
NSN 6320-00-925-0558