End item listed as pn 8750015-sa
No other part numbers with same form, fit, and function found.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 5965-01-569-8634
NSN 5855-01-598-7392
NSN 6145-01-374-1591
NSN 5960-01-431-2487
NSN 6130-01-126-8420
NSN 6150-00-241-5439
NSN 6240-00-811-4640
NSN 6105-01-139-1036
NSN 5905-00-576-3412
NSN 5920-01-386-3188
NSN 6620-01-114-6374
NSN 5905-00-528-9975