A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5990-00-138-9504
NSN 5990-00-932-3070
NSN 4140-01-486-8953
NSN 5895-01-245-2411
NSN 5965-01-121-2511
NSN 5930-01-271-7854
NSN 6105-01-051-3001
NSN 5998-00-626-9896
NSN 6145-01-474-5230
NSN 5835-01-080-3479
NSN 5855-01-063-6187
NSN 5990-00-099-0822