No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5920-01-355-9264
NSN 6150-01-157-6319
NSN 2925-01-109-7177
NSN 7035-01-471-4884
NSN 6645-00-467-6094
NSN 6610-00-079-1508
NSN 4140-01-366-0336
NSN 5905-01-192-4308
NSN 6110-01-255-8635
NSN 6135-00-334-4500
NSN 5950-00-385-8906
NSN 5965-00-954-3011