A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5965-01-463-2815
NSN 6220-01-128-0087
NSN 6220-01-149-0144
NSN 5925-01-613-9807
NSN 6145-00-321-3318
NSN 4140-01-411-6666
NSN 5998-01-245-2242
NSN 6130-01-287-8524
NSN 6645-00-358-7379
NSN 6320-00-228-5678
NSN 4140-00-099-9205
NSN 6105-01-441-0048