No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5835-01-399-5820
NSN 5835-01-545-6467
NSN 5925-00-592-0881
NSN 6130-00-269-4077
NSN 5999-01-500-5371
NSN 5975-01-356-9785
NSN 6105-01-300-9887
NSN 5925-00-800-5350
NSN 5965-01-548-2574
NSN 5960-00-188-8648
NSN 5999-00-594-9180
NSN 5915-01-084-5302