No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6620-00-553-8988
NSN 5925-01-198-7912
NSN 6105-01-497-1459
NSN 2925-00-176-3889
NSN 5999-00-858-4270
NSN 5920-00-403-2675
NSN 6650-01-359-8537
NSN 6130-00-186-0737
NSN 5935-01-441-4919
NSN 6650-00-299-9681
NSN 5905-00-064-3153
NSN 6135-00-405-1989