No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 7035-01-106-3476
NSN 6220-00-493-9641
NSN 5985-01-520-4637
NSN 6320-01-449-1014
NSN 5855-00-925-0114
NSN 6240-01-139-7467
NSN 5930-01-113-1769
NSN 6240-01-532-4211
NSN 2925-01-127-0167
NSN 5905-01-419-9367
NSN 5985-00-144-8170
NSN 5905-01-520-7582