No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6240-01-004-7515
NSN 5985-00-597-2966
NSN 5895-01-425-1475
NSN 5999-01-469-6439
NSN 6650-01-177-4398
NSN 5910-00-538-2529
NSN 5905-01-406-6613
NSN 5930-01-252-4612
NSN 6145-01-422-5319
NSN 5998-01-441-3877
NSN 6150-01-017-4654
NSN 6650-01-511-5262