No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6320-01-578-6006
NSN 5925-00-925-9599
NSN 5920-01-245-8510
NSN 6320-01-335-8336
NSN 5996-01-007-9421
NSN 5925-01-535-6212
NSN 6105-01-435-7254
NSN 5915-01-147-8959
NSN 5905-00-463-0194
NSN 5965-01-339-0059
NSN 6650-00-948-3647
NSN 5999-01-010-4330