Solid color
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5925-01-309-9622
NSN 5996-00-428-8130
NSN 5920-00-412-4813
NSN 2925-00-872-4474
NSN 6145-01-605-0948
NSN 6130-01-415-0944
NSN 5999-00-473-5597
NSN 6320-01-209-0952
NSN 5985-00-872-8606
NSN 6685-01-422-5242
NSN 6650-01-526-8147
NSN 6240-01-475-8543