A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
NSN 7035-01-007-7181
NSN 5895-01-020-8990
NSN 5960-01-210-0879
NSN 6130-01-449-7930
NSN 5910-01-406-3505
NSN 6110-00-944-8607
NSN 5895-01-641-5417
NSN 5935-01-056-5494
NSN 5920-00-617-9909
NSN 5930-01-400-6126
NSN 5945-01-155-6289
NSN 2925-00-845-1480