A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets, washers and other seals, of vulcanized rubber other than hard rubber
NSN 6685-00-476-7011
NSN 5855-00-610-4052
NSN 6240-01-307-5094
NSN 5996-00-110-5476
NSN 6135-01-381-4675
NSN 6650-01-232-0275
NSN 4140-01-133-6386
NSN 5975-01-267-3479
NSN 7035-00-946-2642
NSN 6110-01-273-0223
NSN 5950-00-166-0794
NSN 5905-01-010-7550