No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5835-01-495-0595
NSN 5910-01-324-4093
NSN 5930-01-478-5847
NSN 6145-01-533-2563
NSN 5945-01-334-1341
NSN 5925-01-417-1942
NSN 5990-01-172-4553
NSN 5835-00-943-2763
NSN 5999-00-570-9291
NSN 5935-00-186-9370
NSN 6320-01-592-6248
NSN 5855-01-379-8751