A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Made-up articles of textile material, nesoi
NSN 5935-01-553-1401
NSN 6645-00-355-8610
NSN 5960-01-189-5712
NSN 5920-01-246-3652
NSN 5935-01-386-1206
NSN 5999-01-537-4364
NSN 6145-00-117-8861
NSN 5950-00-149-8597
NSN 5920-00-401-7951
NSN 6150-01-316-8659
NSN 6620-00-860-1626
NSN 5905-01-544-2098