No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 4140-00-307-2732
NSN 5855-01-463-5832
NSN 5945-01-642-6805
NSN 6220-01-555-1543
NSN 6320-01-054-3046
NSN 7035-01-633-9537
NSN 5855-00-560-0110
NSN 5975-00-468-6111
NSN 5935-00-694-2762
NSN 5925-01-426-6923
NSN 6145-01-213-0754
NSN 5985-01-165-0411