A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Articles of plastics & articles of other materials of heading 3901 to 3914, nesoi
NSN 5975-00-944-8484
NSN 5905-00-597-6081
NSN 5985-00-258-3205
NSN 7035-00-215-3272
NSN 5835-00-289-9080
NSN 5835-00-987-9341
NSN 5999-00-691-8547
NSN 5935-00-504-5968
NSN 5920-00-601-2390
NSN 5996-01-238-2656
NSN 6645-00-221-1058
NSN 5905-01-293-4126