No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5905-01-438-2464
NSN 5910-01-411-9704
NSN 6240-00-434-3771
NSN 6105-01-501-5402
NSN 6620-00-321-3630
NSN 6105-01-350-8765
NSN 6645-01-413-0515
NSN 5915-01-540-6150
NSN 6650-00-123-9677
NSN 5920-00-155-2173
NSN 6135-00-411-3171
NSN 6220-01-335-9702