1 0.250 in. By 45 degrees beveled corner
No other part numbers with same form, fit, and function found.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Tube or pipe fittings of nickel
NSN 5960-01-114-0197
NSN 5905-01-487-6889
NSN 5975-00-383-7679
NSN 5895-00-238-3740
NSN 5835-00-092-1136
NSN 6320-01-215-1133
NSN 5975-01-084-7946
NSN 6240-00-443-8000
NSN 6145-01-470-1521
NSN 6130-01-424-0737
NSN 5915-00-842-6823
NSN 5855-01-590-3323