11 gauge sheet steel-3 in long, 3 in wide-has 1 7/8 in long by 3/6 in wide center cut
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5855-01-332-7594
NSN 5999-00-936-1377
NSN 5935-00-161-3429
NSN 6620-00-545-5689
NSN 5985-01-241-8742
NSN 6320-01-434-6861
NSN 5910-00-104-5953
NSN 6240-01-272-5893
NSN 6110-00-236-1646
NSN 6150-01-468-6745
NSN 5945-00-951-5743
NSN 7035-01-592-1604