Cage 1l160 is oem
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6135-00-016-0071
NSN 6240-01-043-4532
NSN 5930-01-475-0661
NSN 6685-00-991-1264
NSN 5895-01-339-2618
NSN 5855-01-359-5727
NSN 5998-01-317-0398
NSN 5975-00-471-8431
NSN 5855-00-560-0110
NSN 6150-01-258-4036
NSN 5930-00-541-8594
NSN 5999-01-394-4115