Item has a dry film lube applied to the shank and the threads only with 100 percent coverage of threads and 80 to 100 percent coverage of the shank length
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Classification: Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)
NSN 5996-00-230-4332
NSN 5996-00-504-6061
NSN 5996-01-415-9202
NSN 6650-01-338-9998
NSN 6645-01-629-6343
NSN 6645-00-067-7070
NSN 5910-00-196-4843
NSN 5925-01-184-0633
NSN 6105-01-123-8887
NSN 5920-01-354-1598
NSN 5905-01-412-1601
NSN 7035-01-182-1086