Primer finish; 1.375 in.Nom. 1st leg lg2.125 in. Nom.2nd leg lg.90.0 degrees nom. 1st leg angle 0.250 in. Nom.1st and 2nd leg thk, 90.0 degrees nom.2nd leg angle, 8.062 in. Nom. Center section h. 0.250 in. Nom. Center secion thickness 2.125 in. Nom 1st leg w. 0.438 in. Nom. 1st leg hole diam. 1.125 in. Nom 1st leg dist between hole centers along w. Legs not identical, 1.125 in. Nom 2nd leg w. 0.438 in. Nom 2nd leg hole dia. 1.000 in. Nomn. 2nd leg dist from edge to hole ctr along lg. 0.625 in. Nom 2nd leg dist from edge to hole center along w. Plain mtg type hole
No other part numbers with same form, fit, and function found.
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also bracket, angle and bracket (1), mounting.
NSN 5965-00-368-8204
NSN 4140-00-456-0902
NSN 5950-01-139-5266
NSN 5835-01-009-2417
NSN 6240-01-416-7528
NSN 5996-00-363-9666
NSN 5990-00-090-3829
NSN 2925-01-344-6073
NSN 5895-01-171-7250
NSN 5985-01-217-1370
NSN 5945-00-085-3482
NSN 6645-01-579-2898