One 0.159 minus 0.001 plus 0.005 in. Diameter hole csk 90 degrees porm 5 degrees to 0.190 din both sides, one 0.063 minus 0.001 plus 0.003 in. Diameter hole thru
No other part numbers with same form, fit, and function found.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 6610-00-001-2517
NSN 2925-01-011-2325
NSN 5990-01-373-3104
NSN 6135-01-322-4655
NSN 5855-00-100-9003
NSN 5945-00-948-2875
NSN 6150-01-109-0943
NSN 5996-00-067-3652
NSN 6610-01-424-0776
NSN 6105-01-545-1485
NSN 5950-01-557-6996
NSN 5985-01-253-9911