Gage, l p shaft stretch; consists of a dial indicator mounted on a cylindrical block, counter bored to accept the indicator point, center bored blocks are stacked on a surface plate to reflect the stretch requirements, dial indicator is then inserted into the blocks and zeroed, placing the dial indicator into the assembled l.P. Shaft assembly will provide the torque stretch readings, l: p.Shaft nut is then torqued one flat at a time after seating to the required limits and verified at the l.P. Shaft and a nut be reapplying the gage
No other part numbers with same form, fit, and function found.
A gage used to check or inspect contour, radius, chamfer, depth, thickness and/or height by inclusive fit of a work piece.
Classification: Railway track fixtures; mechanical signaling, safety or traffic control equip for railways, roads, inland waterways, airfield, ports; and parts
NSN 5915-01-264-7511
NSN 5965-01-469-0053
NSN 5855-01-085-5354
NSN 5999-00-141-0291
NSN 6620-00-527-6523
NSN 6320-01-643-0850
NSN 5999-00-819-1292
NSN 5855-01-187-2293
NSN 6110-01-188-7432
NSN 6650-01-065-2796
NSN 5975-00-262-0896
NSN 6145-01-014-6260