Used on receiver transmitter
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5965-00-854-2075
NSN 5975-00-557-4140
NSN 6240-00-423-9575
NSN 6645-00-488-4432
NSN 5998-01-124-8181
NSN 6610-01-221-2606
NSN 6240-00-422-1278
NSN 5985-01-034-6489
NSN 5920-00-691-7727
NSN 5920-00-288-5849
NSN 6620-01-605-2590
NSN 5965-00-087-3245