A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5930-01-157-9640
NSN 6645-01-595-1160
NSN 5985-00-970-4085
NSN 5998-00-781-9588
NSN 5910-00-957-6217
NSN 5999-01-612-9353
NSN 4140-00-143-9084
NSN 5915-01-191-7554
NSN 6220-01-080-2783
NSN 5855-01-241-1054
NSN 7035-01-007-1802
NSN 5990-00-382-5885