A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other articles of leather or composition leather, nesoi
NSN 6620-00-233-6839
NSN 5895-01-204-8433
NSN 6610-00-104-7518
NSN 6610-01-351-4607
NSN 5985-01-113-7113
NSN 6620-00-753-0745
NSN 6320-00-025-9910
NSN 6240-01-062-0878
NSN 5950-01-544-3432
NSN 5835-01-328-6626
NSN 5965-01-357-8259
NSN 6685-00-632-0299