No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5975-00-679-6738
NSN 7035-01-590-8528
NSN 6610-00-347-7860
NSN 5920-01-054-7230
NSN 5999-01-077-3270
NSN 5925-01-604-1113
NSN 5945-01-568-1448
NSN 5905-01-131-0346
NSN 6150-01-619-1098
NSN 5950-01-490-3502
NSN 5960-00-167-0397
NSN 6650-00-849-9689