No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5920-01-459-8493
NSN 5935-00-450-1652
NSN 5895-00-119-8600
NSN 5835-01-565-3411
NSN 6220-01-351-0183
NSN 4140-01-400-3610
NSN 5910-01-041-7996
NSN 5985-01-550-4732
NSN 6645-00-994-6664
NSN 5960-01-657-5958
NSN 4140-00-111-3247
NSN 5960-01-230-6380