An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Classification: Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)
NSN 6220-01-411-6664
NSN 5960-01-344-2604
NSN 5925-01-350-3646
NSN 4140-00-959-4255
NSN 6145-00-996-8879
NSN 6620-00-461-4934
NSN 5950-01-437-5784
NSN 6240-01-004-9634
NSN 5950-01-064-4799
NSN 5998-01-154-2044
NSN 2925-00-056-7112
NSN 5990-01-392-5682